User's Manual

User’s Manual
10
4. How to Configuring the AP/ Router
START UP & LOGIN
In order to configure the SpeedPlus Wireless-G AP/Router, you must use web browser and
manually input http://192.168.2.1 into the Address box and press Enter. The Main Page will
appear.
In order to configure the SpeedPlus Wireless-G AP/Router, you must input the password
into the Password box and leave blank on the User Name box. The default User name is
“admin” and password is “1234”.
TURN ON POWER SUPPLY
Quick power cycle would cause system corruption. When power on, be careful not to shut
down in about 5 seconds, because data is writing to the flash.