User Manual

User’s Guide
7
After complete the procedure, insert your WLAN card into PCI connector of your system, and then
system will detect new hardware. Select “Install the software automatically (Recommended) ”,
and then click Next to continue. After copy the file to your system, then the setup is finish.
4. Click the right button of mouse on My Computer Æ Manage Æ Device Manager.
Check whether it has WLAN adapter in one of the sockets or not. If you find Wireless 11n PCI
Adapter in one of the sockets, it means the card is detected properly.
If you cannot find this adapter on device manager, please click the Action Æ Scan for hardware
changes to search again. If this adapter is shown with yellow exclamation mark, please remove it
and click the Action Æ Scan for hardware changes to search this hardware again for proper
hardware installation.
5. Click StartÆ SettingsÆ Network Connections or right click mouse on the My Network Places
(Network Neighborhood) for TCP/IP setting.