User's Manual

Wireless Service Manual
Page 99 of 124 RA14-11A-022
3 Select an item to add to the Defect list, and then click the Add button.
 Add Pixel: Add one pixel unit of defect pixel.
 Add V-Line: Add line type of defect pixels vertically.
 Add H-Line: Add line type of defect pixels horizontally.
 Delete Pixel: Delete one pixel unit of defect pixel.
 Delete V-Line: Delete line type of defect pixels vertically.
 Delete H-Line: Delete line type of defect pixels horizontally.
 Zoom: Zoom in or out the image.
 W/L: Adjust the window level of the image.
 Pan: Move the image.
 Show: Determine whether to display the selected defect pixel on the image.
 ROI: Automatically adjust the window level based on the Min. and Max. value of the
selected area.
 1:1: Display the image at one to one ratio.
 Fit: Display the image to fit into the screen.
4 Once it is finished to display the defect pixels in the image, save the newly created defect map file and
complete the process by clicking the Save and close button. To cancel it, click the Close button.