User's Manual

Wireless Service Manual
Page 82 of 124 RA14-11A-022
5.3.2 Configuring Devices
1 The list of connected SCU and registered detectors will be displayed.
2 Click the Configuration button on the right side of SCU to display the SCU Configuration window
described in chapter
5.3.2.1.
3 Click the Configuration button on the right side of Detector to display the Detector Configuration
window described in chapter
5.3.2.2.
4 Click the Calibrate button on the right side of Detector to display the Calibration window described in
chapter
5.4.
5 After completing calibration of the detector, the Diagnose button will be activated. Click the button to
move to
Diagnosis Mode described in chapter 5.5.