User's Manual

Wireless Service Manual
Page 77 of 124 RA14-11A-022
5. Prerequisite for Operation
5.1 Preparing the SCU
1 Turn on the System Control Unit (SCU).
2 Make sure the LED lamp (power and status) is lit green. It means SCU is ready to work normally.
3 Press and hold the power button of the detector for 3 seconds.
4 The detector Power LED is lit green and Active LED is lit orange simultaneously when the detector is
ready to operate.
5 Blinking green status LED indicates the startup process is in progress. Then status LED turns blue
indicating Wi-Fi network is connected.