User's Manual

Wireless Service Manual
Page 31 of 124 RA14-11A-022
1
2
3
4
5
6
7
Figure 2.4 System Control Unit (Back)
No. Name
Description
1 EXT_INF  Provides connection to the X-ray generator.
2 Port 1  Provides Gigabit Ethernet (1000BASE – T) communication
between the workstation and SCU.
 Gigabit Ethernet (1000BASE – T) Port
Port 2, Port 3  Provides communication between FXRD-1717 and SCU when
configuring multiple detectors.
 Gigabit Ethernet (1000BASE – T) Port
3 Status LED  Indicates Port 4 and Port 5 status (Green: 1Gbps, Orange:
100Mbps)
4 Port 4, Port 5  Connection interface to communicate with the detector and to
supply electrical power to the detector (Only for FXRD-1417).
 Power over Ethernet Port (1000BASE-T)
5 Power Supply  Connection interface to supply power to a FXRD-1717 detector.
 Max. DC +24V/24W (×2 ports)
6 P.E  Provides connection to equipotential ground.
7 AC Input  Connect the power cable to the power socket.
 100 ~ 240V, 50/60 ㎐, T2AL250V Fuse (2 EA)
Table 2.5 System Control Unit Components (Back)
P.E (Potential Equalization) of SCU is used to keep equipotential between SCU and an
equipment to be used with ViVIX-S Wireless. To connect to P.E of equipment, use a
ground cable.