User's Manual
Wireless Service Manual
Page 26 of 124 RA14-11A-022
2.2 Detector
2.2.1 Detector Specifications
Item Description
Model FXRD-1417WA(B)
Purpose General radiography
Image Matrix Size
2560 × 3072 pixels
Pixel Pitch
140 ㎛
Effective Imaging Area
358 ㎜ × 430 ㎜
Grayscale 14 bit, 16,384 grayscale
Scintillator CsI (Cesium Iodide) or Gadox (Gadolinium Oxysulfide)
Image Acquire and Transfer Time Preview: 2 s, Image Processing: 6.5 s (2 s when using Tether Interface)
Spatial Resolution
Min. 3.5 line pair/㎜
Rated Power Supply
Wireless
Wired
DC +24 V, Max. 0.5 A
Powered by the battery pack (4,000 ㎃ h)
Powered by the SCU using tether interface
Power Consumption Max. 12 W
Wireless Communications
IEEE 802.11a/b/g/n (2.4 ㎓ / 5 ㎓)
†
Tether Interface (Optional) Gigabit Ethernet (1000BASE-T) via
‡
PoE
Imaging Plate Carbon Fiber Plate
Cooling Air cooling
Dimensions (H × W × D)
384 ㎜ × 460 ㎜ × 15 ㎜
Weight
3.0 ㎏ (including battery pack)
Environmental Requirements
Operation Temperature: +10 ∼ +35℃
Humidity: 30 ∼ 85% (Non-Condensing)
Atmospheric pressure: 70 ∼ 106 ㎪
Altitude: Maximum 2000 meters
Storage and transportation Temperature: -15 ∼ +55℃
Humidity: 10 ∼ 90% (Non-Condensing)
Atmospheric pressure: 50 ∼ 106 ㎪
Altitude: Maximum 2000 meters
Table 2.1 Detector Specifications
†
Tether Interface: Allows the detector to communicate with SCU via Ethernet cabling when wireless communications is
not available or higher speed data transfer is necessary.
‡
PoE (Power over Ethernet): Delivers electrical power over LAN cabling to the networked device.