User Manual

User’s Guide
11
4.1 Link Information
Connected To Network
-
-
This field is used to display the current status of connection. There are two states of it.
The first one is “Connected to Network“ means normal flow of operation in Infrastructure mode. The
PC is connected to access point. Networking is available.
The second one is “Scanning” means that the node is searching for available Access Point within
effective range. This field will also display an error message for some reason if the driver fails to
initial.
♦ Network Type
Infrastructure Mode - The driver will scan all available channels continuously until it found
one or more Access Points that match its SSID. At that point it will try and authenticate and
associate with the Access Point.
Peer to Peer Mode - The driver will scan for 5 seconds looking for an existing Ad Hoc
network using the same SSID.