User Manual

k. SSID: The Service Set
Identier is the name assigned
to the wireless network. The
factory SSID setting is set to
default. Make changes here
to match the SSID on existing
wireless router or access point.
L. Wireless Mode:
The factory setting is
set to Infrastructure.
Ad-Hoc mode is used
for Peer-to-Peer
networking.
M. Authentication:
You can specify the
authentication mode
for the wireless
network. The default
setting is set to Open
Authentication.
K
L
M
N
O
P
N. Data Encryption:
The default setting is
set to Disable. The
adapter supports
WEP and AES
when encryption is
enabled.
O. Key Length:When
encryption is enabled, you
will have the option to specify
the level and key format of the
encryption used. Select the
appropriate Key Index:
1-4 and enter ACSII or
hexadecimal digits in the
appropriate eld.
P. IEEE 802.1X:
When encryption is
enabled, you will have
the option to specify if
you wish to use 802.1x
authentication.