User Manual
Table Of Contents
- 2010-05-07_WCR-150GN user manual_rev05
- Copyright Statement
- 1. Introduction
- 2. Safety Notification
- 3. Hardware Installation
- 4. First Time Configuration
- 4.1 Install Wizard
- 4.2 Operation Mode
- 5. Internet Settings
- 5.1 Configuring WAN Interface
- 5.2 Configuring LAN Interface
- 5.3 DHCP Client List
- 6. Wireless Settings
- 6.1 Access Point & Router mode
- 6.2 AP Client mode
- 7. Firewall
- 7.1 DMZ
- 8. Administration
- 8.1 Management
- 8.2 Firmware Update
- 8.3 Settings Management
- 8.4 Status
- 8.5 Statistics
- 9. Troubleshooting – Q & A
- WCR-150-EC-DoC
- FCC + NCC Statement
User’s Guide
6
Rear Panel
The rear panel features Reset button and WPS Button. Refer to the following table for the meaning
of each feature.
Ethernet RESET/WPS Power
RESET Button
The RESET button can restore device to factory default settings by press this button
for approx.
WPS Button
Press this button to start WPS function..
Default Settings
Operation
Mode
Access Point
Router
●AP Client
User admin
Password admin
IP Address 192.168.1.250
Router Mode
IP Address
172.32.1.254
Subnet Mask 255.255.255.0
SSID SparkLAN_11N_AP
Channel 6
Mode 11b/g/n mixed mode
Encryption Disabled
WPS Function Disabled
DHCP Server Enabled