User Manual
Table Of Contents
- 2010-05-07_WCR-150GN user manual_rev05
- Copyright Statement
- 1. Introduction
- 2. Safety Notification
- 3. Hardware Installation
- 4. First Time Configuration
- 4.1 Install Wizard
- 4.2 Operation Mode
- 5. Internet Settings
- 5.1 Configuring WAN Interface
- 5.2 Configuring LAN Interface
- 5.3 DHCP Client List
- 6. Wireless Settings
- 6.1 Access Point & Router mode
- 6.2 AP Client mode
- 7. Firewall
- 7.1 DMZ
- 8. Administration
- 8.1 Management
- 8.2 Firmware Update
- 8.3 Settings Management
- 8.4 Status
- 8.5 Statistics
- 9. Troubleshooting – Q & A
- WCR-150-EC-DoC
- FCC + NCC Statement
User’s Guide
5
3. Hardware Installation
Front Panel
The front panel provides LED status of device. Refer to the following table for the meaning of each
feature.
LED Name Light Status Description
Power
On The device is on and ready.
Off The device is off.
Activity
On The device is on and ready.
Off The device is off.
Flashing The device is transmitting or receiving data.
Link
On The device is connected to an Ethernet network.
Off The device is off or there is no Ethernet connection.
Side view