User Manual

User’s Guide
27
PBC: Select PBC, and then you can begin the PBC process. Press the PBC button in the rear
panel can also trigger this process. Press or click the PBC button on the WLAN client to finish the
communication. You can press the PBC button on the WLAN client first and then click the PBC
button on this device to establish the encryption.
The options and the information fields are shown below.
WPS Config
Item Description
WPS
Through drop-down manual to enable / disable this
function.
WPS Summary
Item Description
WPS Current Status
It shows the current status of the WPS process.
WPS Configured
It indicated whether the WPS is configured.
WPS SSID
It is the SSID of this device.
WPS Auth Mode
It indicates the authenticate mode of this device. It can
be configured in the wireless security page.
WPS Encryption
Type
It indicates the encryption method of this device. Like
WPS authentication mode, it can be configured in the
wireless security page.
AP PIN
It shows the current PIN number of this device.
Auto WPS Settings
Press this button to setup the WPS of this device.
WPS Progress
Item Description
WPS mode
Choose to use PIN (Personal Identification Number) or
PBC (Push Button Communication).
PIN
Input the 8-digits PIN of client.