User Manual
Table Of Contents
- 2010-05-07_WCR-150GN user manual_rev05
- Copyright Statement
- 1. Introduction
- 2. Safety Notification
- 3. Hardware Installation
- 4. First Time Configuration
- 4.1 Install Wizard
- 4.2 Operation Mode
- 5. Internet Settings
- 5.1 Configuring WAN Interface
- 5.2 Configuring LAN Interface
- 5.3 DHCP Client List
- 6. Wireless Settings
- 6.1 Access Point & Router mode
- 6.2 AP Client mode
- 7. Firewall
- 7.1 DMZ
- 8. Administration
- 8.1 Management
- 8.2 Firmware Update
- 8.3 Settings Management
- 8.4 Status
- 8.5 Statistics
- 9. Troubleshooting – Q & A
- WCR-150-EC-DoC
- FCC + NCC Statement
User’s Guide
20
Start IP Address
This is the first IP Address of the IP pool which the server
assigns the IP Address from.
End IP Address
This is the last IP Address of the IP pool.
Subnet mask
This is the subnet mask of this domain. The default value
is “255.255.255.0”.
Primary DNS
Server
This is the primary DNS server for the LAN PCs.
Secondary DNS
Server
This is the second DNS server for the LAN PCs.
Lease Time
This is the DHCP lease time. When it is short, the issued
IP address to DHCP clients will be updated frequently. It
is recommended to keep default setting except for
another purpose.
Statically
Assigned
You can manually assign the IP Address to the certain
PCs. Enter the MAC Address and IP Address in the table.
5.3 DHCP Client List