User Manual
Table Of Contents
- 2010-05-07_WCR-150GN user manual_rev05
- Copyright Statement
- 1. Introduction
- 2. Safety Notification
- 3. Hardware Installation
- 4. First Time Configuration
- 4.1 Install Wizard
- 4.2 Operation Mode
- 5. Internet Settings
- 5.1 Configuring WAN Interface
- 5.2 Configuring LAN Interface
- 5.3 DHCP Client List
- 6. Wireless Settings
- 6.1 Access Point & Router mode
- 6.2 AP Client mode
- 7. Firewall
- 7.1 DMZ
- 8. Administration
- 8.1 Management
- 8.2 Firmware Update
- 8.3 Settings Management
- 8.4 Status
- 8.5 Statistics
- 9. Troubleshooting – Q & A
- WCR-150-EC-DoC
- FCC + NCC Statement
User’s Guide
19
5.2 Configuring LAN Interface
Item
Description
IP Address
This is the IP Address for this device. You can login this
device by the IP Address via LAN or WLAN physical
interface and do any necessary configuration change.
Subnet Mask
This is the subnet mask for the LAN. The default value is
“255.255.255.0”.
MAC Address
The MAC Address of LAN is shown in this field.
DHCP Server
You can select to enable DHCP server. When enabling
the DHCP server, you must setup the information below.