User Manual

User’s Guide
11
4.3 Wireless
SSID : only Access Points and clients that share this SSID are able to communicate with
each other. Your networking client allows you to choose to which network you
connect. The network names you see there are SSIDs.
Band : select the policy for internal radio. There are 3 types of band setting, the default
mode is Mixed.
Radio Channel : select the appropriate channel from the list provided to correspond with your
network settings. You shall assign a different channel for each AP to avoid
signal interference.
Broadcast SSID : this setting is related with SSID for whether it can be broadcasted by wireless
or not.
Enable L2 Isolation: enable this setting will reject clients to communicate between themselves by this
AP.
Preamble Type : select the head length of the packet. There are 2 types can be supported, long
and short.