User Manual

4. Click “Apply” button to finish the Setup if you have something

change. The follow screen would appear to notify you the system is

rebooting. All changes will be taken effect while reboot procedure is

completed.

5. While the AP reboot procedure is completed, you may change the

TCP/IP properties of this computer. Select the “Obtain an IP address

automatically” instead of “Use the following IP Address “ item if

your local network has DHCP server service to assign IP address for

your wireless client. This step will set your computer as DHCP client

and get IP from your DHCP server via AP.

If there is no DHCP server in your network, then you should assign

one proper IP address manually to fit your network IP subnet.

6. For DHCP client, using following command to check if your computer

already got IP address.

 Win2000, WinXP: type the “ ipconfig “ on your windows

Command Prompt.

 Win98, WinME: type the “ winipcfg “ on your windows MS-DOS

Prompt.

Once you got the IP address, subnet mask and default gateway, that

means your computer already connected to local network.

For detail configuration of this AP, please refer to the CD-ROM.