User Manual Part 2

57
PPPoE
When the PPPoE (Point to Point Protocol over Ethernet) WAN Access Type
is selected, you must fill the fields of User Name, Password provided by your
ISP. The IP configuration will be done when the device successfully
authenticates with your ISP.
User Name:
The account provided by your ISP
Password:
The password for your account.
Connect Type:
“Continuous “ : connect to ISP permanentlyʳ“Manual” :
Manual connect/disconnect to ISPʳ“On-Demand” :
Automatically connect to ISP when user need to access
the Internet.
Idle Time:
The number of inactivity minutes to disconnect from
ISP. This setting is only available when “Connect on
Demand” connection type is selected.
MTU Size
: Maximum Transmission Unit, 1412 is the default
setting, you may need to change the MTU for optimal
performance with your specific ISP.
DNS1~3
: The IP addresses of DNS provided by your ISP.DNS
(Domain Name Server) is used to map domain names
to IP addresses. DNS maintain central lists of domain
name/IP addresses and map the domain names in
your Internet requests to other servers on the Internet
until the specified web site is found.
Clone MACʳAddress:
Clone device MAC address to the specify MAC address
requiredʳby your ISP.
Enable UPnP:
Enable UPnP, this function allows the device to be
found and configured automatically by the system. (Ex.
Window XP)