User Manual Part 2

76
1. Discover
After press this button, you could see there are how many devices in
your network. And you would see the basic information about these
devices, such as:
ɿ SSID
ɿ IP Address
ɿ Subnet Mask
ɿ Channel number
ɿ MAC Address
ɿ Active Client: this field shows how many clients associated with
the device
ɿ RSSI: this field shows Received Signal Strength I indication while
device is on AP-Client mode
2. S
Setup IP
After you press the Setup IP button, you would see Setup IP
Address window. You could change device’s IP Address, Netmask,
and Default Gateway in this window. But if the device’s web server
needs User Name and Password to login, you should fill in these two
fields and then apply changes.