User Manual Part 2

2. QoS Rule settings

Label Description

IP Address Enter source/destination IP Address in dotted decimal notation.

Netmask

Once the source/destination IP Address is entered, the subnet

mask address must be filled in this field.

MAC Address Enter source/destination MAC Address.

Port / range

You can enter specific port number or port range of the

source/destination

Protocol

Select a protocol from the drop down list box. Choose TCP/UDP,

TCP or UDP.

Bandwidth

Priority

Select a bandwidth priority from the drop down list box. Choose

Low, Medium or High.

Filter Priority

Select a filter priority number from the drop down list box. Lower

number gets higher priority while two rules have the same

bandwidth priority.

IP TOS Match

Select an IP type-of-service value from the drop down list box.

Choose Normal Service, Minimize Cost, Maximize Reliability,

Maximize Throughput, or Minimize Delay.

Apply Changes Click this button to save and apply your settings.

Reset Click this button to begin re-input the parameters.