User Manual Part 2

1. Enable QoS and enter Max Throughput (default 20Mbps) ଞ

Bandwidth Ratio (default H:50%, M:30%, L:20%)

The following table describes the labels in this part.

Label Description

QoS Enabled

Select this check box to enable quality of

service.

Bandwidth Borrowed

Select this check box to allow a rule to

borrow unused bandwidth. Bandwidth

borrowing is decided by priority of the

rules. Higher priority will get the remaining

bandwidth first.

Max Throughput

Enter the value of max throughput in kbps

that you want to allocate for one rule. The

value should between 1200 kbps and

24000 kbps.

Bandwidth Ratio (H/M/L)

You can specify the ratio of priority in

these fields. The range from 1 to 99. The

High priority’s ratio should higher than

Medium priority’s ratio and Medium

priority’s ratio should higher than Low

priority’s ratio.

Apply Changes

Click this button to save and apply your

settings.