User Manual Part 2

62
Bandwidth Control
This functionality can control Bandwidth of Up/Downstream
1. Enable Bandwidth Control and then enter Data RateΕLatency and Burst
Packet in the specific field.
Note: Only device on Client mode or WISP mode this functionality can take
effective.
2. Parameter Definition
Label Description
Upstream Data Rate
Speed of transmit data that from Ethernet
interface to Wireless interface.
Upstream Latency
Similar a waiting time the data queuing-
time
Upstream Burst Packet
Similar a buffer the data will into the
buffer while the data is transmit or receive.
Downstream Data Rate
Speed of transmit data that from Wireless
interface to Ethernet interface.
Downstream Latency
Similar a waiting time the data queuing-
time.
Downstream Burst Packet
Similar a buffer the data will into the
buffer while the data is transmit or receive.