User Manual Part 1

49
WDS Application
Wireless Repeater
Wireless Repeater can be used to increase the coverage area of another
device (Parent AP). Between the Parent AP and the Wireless Repeater,
wireless stations can move among the coverage areas of both devices.
When you decide to use the WDS as a Repeater, please refer the following
instructions for configuration.
ɿ In AP mode, enable the WDS function
ɿ You must set these connected devices with the same radio channel andʳ
SSID.
ɿ Choose “WDS+AP” mode.
ɿ Using the bus or star network topology.
Description Entries of WDS AP List
Spanning Tree
Protocol Requires
Access Point The MAC Address of Repeater Yes
Repeater
The MAC Address of Access Point Yes