User Manual Part 1

42
Note Κ
If the available network requires authentication and data encryption, you
need to setup the au
thentication and encryption before step1 and all the
settings must be as same as the Access Point or
Station. About the detail
authentication and data encryption settings, please refer the security
sect
ion.
Authentication Type
In client mode, the device also supports two Authentication Types “Open
system” and “Shared Key”. Although the default setting is “Auto”, not every
Access Points can support “Auto” mode. If the authentication type on the
Access Point is knew by user, we suggest to set the authentication type as
same as the Access Point.
Data Encryption
In client mode, the device supports WEP and WPA Personal/Enterprise
except WPA2 mixed mode data encryption. About the detail data encryption
settings, please refer the security section.