User Manual Part 1

Configuring as WLAN Client Adapter

This device can be configured as a wireless Ethernet adapter. In this

mode, the device can connect to the other wireless stations (Ad-Hoc network

type) or Access Point (Infrastructure network type) and you don’t need to

install any driver.

Quick start to configure

Step 1.

In “Basic Settings” page, change the Mode to “Client” mode.

And key in the SSID of the AP you want to connect then press “Apply

Changes” button to apply the change.

Step 2.

Check the status of connection in “Status” web page

The alternative way to configure as following: