User Manual Part 1

Block WLAN Relay (Isolate Client)

The device supports isolation function. If you are building a public

Wireless Network, enable this function can provide better security. The

device will block packets between wireless clients (relay). All the wireless

clients connected to the device can’t see each other.

Transmit Power

The device supports four transmission output power levels 250, 200, 150

andʳ100mW for CCK (802.11b) mode and two transmission output power

levelsʳ100 and 50mW for OFDM (802.11g) mode. User can adjust the power

level to change the coverage of the device. Every wireless stations located

within the coverage of the device also needs to have the high power radio.

Otherwise the wireless stations only can survey the device, but can’t

establish connection with device.