User Manual Part 1

Advanced Settings

These settings are only for more technically advanced users who have

sufficient knowledge about wireless LAN. These settings should not be

changed unless you know what effect the changes will have on your device.

The default setting is optimized for the normal operation. For specific

application, setting configuration will required highly attention to reach

optimistic condition.

NoteΚ

Any unreasonable value change to default setting will reduce the throughput

of the device.

Authe

ntication Type

The device supports two Authentication Types “Open system” and “Shared

Key”. When you select “Share Key”, you need to setup “WEP” key in

“Security” page (See the next section). The default setting is “Auto”. The

wireless client can associate with the device by using one of the two types.

Fragment Threshold

The fragmentation threshold determines the size at which packets are

fragmented (sent as several pieces instead of as one block). Use a low

setting in areas where communication is poor or where there is a great deal

of radio interference. This function will help you to improve the network

performance.