User's Manual

Here are descriptions of every setup items:

Band (2): Select the band you want to use; all the wireless

routers must use the same setting.

SSID (3): Input the SSID of your wireless router, the setting

should be the same with other wireless routers for

the convenience of roaming.

Channel Select the channel you want to use, all the wireless

Number (4): routers must use the same setting.

Associated Clients (5):Click ‘Show Active Clients’ button, then an “Active

Wireless Client Table” will pop up. You can see the

status of all active wireless stations that are

connecting to the access point.

MAC address Input the MAC address of other wireless routers.

1 to 4 (6 - 9):

Security Click to set security settings for this connection

Setting (10): (Please go to section ‘2-7-3 Wireless Security’ for

detailed instructions).