User's Manual

Here are descriptions of every setup items:

Band (2): Select the band you want to use.

SSID (3): This is the name of wireless network. You can type

the SSID of the network you would like to connect

here.

Site Survey (4): When you use this wireless router as a wireless

station for Ethernet network device to have wireless

capability, you have to associate it with a working

access point. Click ‘Select Site Survey’ button, then

a “Wireless Site Survey Table” will pop up. It will

list all available access points nearby. You can

select one access point in the table and it will join

wireless LAN through this access point.

2-7-1-3 Setup procedure for ‘AP Bridge-Point to Point’:

In this mode, you can connect your wireless router with another, to

combine two access points and expand the scope of wireless network, and

all clients (wired only – AP will not accept wireless clients in this mode)

of two wireless routers will think they’re on the same physical network.

This function is very convenient when you need to connect two networks

between two buildings. Here are instructions about how to connect two

wireless routers together:

2.4GHz AP Bridge (Point to Point) Settings