User's Manual

Here are descriptions of every setup items:

Disable/Enable/ There are three selections for disable or disable

Enable (Station wireless ISP functions.

Mode Only) (1):

Disable: disable this function.

Enable: enable this function and the router can also

act as an access point and allow the wireless clients

to associate to it for WAN access service.

Note: In this mode, if you are informed by your

wireless ISP that the wireless settings of the

access point is changed, please configure the

router in this page for matching the settings.

Enable (Station Mode Only): enable this function

and the router will act as a wireless client and after

connecting to WISP network devices, WAN access

service will be built up through wireless. Users are

allowed to access the WAN service through wired

Ethernet or through another wireless band.

SSID (2): This is the name of wireless network. Input the SSID

name that your wireless ISP provide to you.

Channel Number (3):This is the radio frequency used to transmit and

receive the wireless signal. The wireless devices in