User's Manual

34
To switch the active calipers
 Dooneofthefollowing:
•Toswitchtheactivecaliperwithinaset,click.
•Toswitchtheactiveset,pressSwitch.
To delete or edit a measurement
 Withthemeasurementactive(highlighted),dooneofthefollowing:
•Todelete,presstheDeleteknob.
•Toedit,usethetouchpadtomovethecalipers.
To improve precision of caliper placement
 Doanyofthefollowing:
•Adjustthedisplayformaximumsharpness.
•Useleadingedges(closesttothetransducer)orbordersforstartingandstoppingpoints.
• Maintainaconsistenttransducerorientationforeachtypeofmeasurement.
•Makesurethattheareaofinterestfillsasmuchofthescreenaspossible.
• Minimizethedepth,
orzoom.
Distance measurements
Distanceismeasuredincm.
To measure distance
1 Ona frozenimage,pressCalipers.
Apairofcalipersappears,connectedbyadottedline.
2 Using thetouchpad,positionthefirstcaliper,andthenclick.
Theothercaliperbecomesactive.
3 Using thetouchpad,positiontheothercaliper.
Ifyoumovethecalipersclosetogether,theyshrinkandthedottedline
disappears.
Tosavetheimagewiththemeasurementsdisplayed,see“Tosaveanimage”onpage 28.