User's Manual

30
To review images and clips
Youcanreviewonlyonepatient’simagesandclipsatatime.
1 Inthepatientlist,clickthepatientwhoseimagesandclipsyouwanttoreview.
Thepatientrowishighlighted.
2 Pressthe Reviewknob.
Theiconontheknobchangestotwonumbers:thefiledisplayedandthetotalfiles
saved.
3 Turntheknobtocycletotheimageorclipyouwanttoreview
4 (ClipOnly)PressthePlaykey.
Theclipplaysautomaticallyafterloading.Theloadtimedependsoncliplength.
YoucanpressthePausekeytofreezetheclipandcanturntheright‐handknob
fora
playbackspeed.
5 Turntheleft‐handknobx/xtocycletothenextimageorclipyouwanttoview.
Toreturntothepatientlist,pressList.Toreturntoimaging,press Done.
Printing, exporting, and deleting images and clips
To print an image
1 Verifythataprinterisselected.See“Toconfigurethesystemforaprinter”onpage 18.
2 Dooneofthefollowing:
•Inthepatientlist,reviewthepatient’simages. PressPrintwhentheimageappears.
• Freezetheimage,andpressPrint.
To print multiple images
1 Verifythataprinterisselected.See“Toconfigurethesystemforaprinter”onpage 18.
2 Dooneofthefollowing:
•Printallimagesformultiplepatients:Selectoneormorepatientsinthepatientlist.Then
press Print.
•Printallimag esforonepatient:Highlightthepatientinthepatient
list,andpressPrint.
Eachimageappearsbrieflyon‐screenwhileprinting.
WARNING:
To avoid damaging the USB storage device and losing patient data from it,
observe the following:
• Do not remove the USB storage device or turn off the ultrasound system while
the system is exporting.
• Do not bump or otherwise apply pressure to the USB storage device while it is
in a USB port on the ultrasound system. The connector could break.