Setup Instructions

5
Client certificates
Althoughyoucanconnectwithoutclientcertificates,theyhelptoensurenetworksecurity.
To import or delete wireless certificates
ThesystemsupportsBase64andDERencoded formatand thefollowingfiletypes:CER,PFX,andPVK.
1 OntheConnectivitysetuppage,selectWireless Certificates.
Alistofcertificatesonthesystemappears.
2 Dooneofthefollowing:
•Importcertificates:InserttheUSBstoragedevicethatcontainsthecertificates.Verifythatthe
certificatesonthesystemplusthoseontheUSBstoragedevicedonotexceed20certificatesor200K
ofmemory.Deletecertificatesifnecessary.ThenselectImporton‐screen.
• Deletecertificates:Selectthecertificatestodelete,andselectDelete.
Note: You canobtaincertificatesfromyournetworkadministrator.
3 SelectBackon‐screen.
4
SelectDoneon‐screen.
5 Restartthesystem.
Connecting the wireless USB dongle
Afteryouconnectandconfiguretherouter(ifapplicable)andconfigurealocationontheultrasound
system,connectthewirelessUSBdongle,whichtransmitsthesignalfromtheultrasoundsystemtothe
network.
To connect the wireless USB dongle
 InsertthewirelessUSBdongleintothefollowingUSBport:
•(SSeries)TheUSBportonthesideoftheultrasoundsystem.
•(M‐Turbo)AnyUSBportontheultrasoundsystem.
Thesystemautomaticallydetectsthede vice.(Driversarealreadyinstalled.)
Troubleshooting
Ifyouhavetroubleconnectingtheultrasoundsystemtothewirelessnetwork,seeTable 1,
“Troubleshooting”onpage 6forsuggestions.Ifthetroublecontinues,contactSonoSite:
SonoSite Technical Support
Phone (US or
Canada):
877-657-8118
Phone (Outside
US and Canada):
425-951-1330
Or call your local representative.
Fax: [phone]
E-mail: [e-mail]
Web site: www.sonosite.com (Click Resources > Support & Service)
Europe Service Center
Phone: [phone]
E-mail: [e-mail]