Data Sheet

APPD. DSGD.
VERSION :
PAGE :
DATE APPD CHKD 2010.10.11
2010.10.11
DRAWING NO.:
NO.
項 目試 驗 條 件規 格
Item Test conditions Specifications
6–3
端子與固定板間外加A.C. 300V 1分鐘或外加
備註：軸與開關端子間絕緣。
Note：Shaft is insulated from switch terminal.
Dielectric shrength A voltage of 300V A.C. shall be applied for 1
min or a voltage of 360V A.C. shall be applied Without damage to parts arcing or breakdown.
for 2 sec between individual terminals and
SWITCHES SPECIFICATIONS
6. 開關電氣性能 Switch Electrical characteristics
NO.
項 目試 驗 條 件規 格
Item Test conditions Specifications
100 mΩ以下 (MAX)
震顛雜音
Chattering
一週期動作(OFF-ON-OFF)為1秒鐘。
Switch is operated at the rate of 1 cycle 1 sec.
The 1 cycle shall be OFF-ON-OFF.
10 msec以下 (MAX)
6–1
以D.C.定電流電壓降下法測定之。
Measured by decides the electric current D.C.
voltage drop method.
6–2
無損傷，變形或絕緣破壞現象。
耐 電 壓 A.C.360V 2秒鐘測定。(Leak電流：1mA)
attaching plate.(Leak current：1mA)
6–4
外加D.C. 250V於端子與固定板間。 端子與固定板間100MΩ以上。
絕 緣 阻 抗
Measurement shall be made under the condition Between individual terminals and attaching
insulation which a voltage of 250V D.C. is applied
plate：100MΩ MIN.
resistance between individual terminals and attaching plate
.
Switch rating
D.C.5V 10mA
7. 開關機械性能 Switch Mechanical characteristics
6–5
定格容量
(抵抗負荷)
(Resistor load)
S.P.S.T (PUSH ON)
接點數
單極單投 (PUSH ON)
CHKD.
7–1
開關回路
Contact
arrangement
450±200gf
Switch strength
7–2
開關移動量
0.5 (+0/-0.3) mm
Switch stroke
7–3
開關作動力
DOCUMENT NO. :
9 OF 10
SYMB DSGD
EC12PSD-017
2010.10.11
余倩廖智順
可 正 欣 有 限 公 司
TOP-UP INDUSTRY CORP.
EC12PLRGBSDVBF-D-25K-24-24C-61/08-6H
B
鐘學峰
接 觸 阻 抗
contact
resistance