Data Sheet

APPD. CHKD. DSGD.
VERSION :
PAGE :
DATE APPD DSGD
2010.10.11 2010.10.11 2010.10.11
DRAWING NO.:
TOP-UP INDUSTRY CORP.
30〜200gf.cm
廖智順 鐘學峰 余倩
SYMB CHKD
EC12PSD-017
可 正 欣 有 限 公 司
B
6 OF 10
EC12PLRGBSDVBF-D-25K-24-24C-61/08-6H
DOCUMENT NO. :
3–6
in rotational feeling.
shaft in a direction perpendicular to the axis
軸 松 動
Shaft wobble
軸端5mm處,加上500gf-cm之力矩 .
A momentary load of 500gf-cm shall
1.0XL/30mmp-p以下(MAX)
be applied at the point 5mm from the tip of the
Without damage or excessive play
Push and pull static load of 5Kgf in shaft .No excessive bnormality
3–4
端 子 強 度
Terminal strength
3–5
三. 機械性能 Mechanical characteristics
NO.
回轉式位元產生器規格書
ROTATIONAL ENCODER SPECIFICATION
項 目條 件
item conditions
規 格
specifications
3–2
24點掣子點 24 detents
掣子點轉距
Detent torque
3–3
掣子點數及位置
Number and
(Step angle : 15° ± 3°)
3–1
angle
全 回 轉 角 度
Total rotational
position of detents
(每點角度: 15° ± 3°)
tip of terminals for 1 minute in any direction .
外加靜重300gf之力于端子前端之任意
方向上1分鐘.
A static load of 300gf shall be applied to the
direction for 10sec .( After installing )
shall be applied to the shaft in the axial
10秒 ( 實裝狀態 ) .
在軸之方向加壓力或張力之靜負荷5Kgf .
不可有電氣或機械上的異常
L：軸的固定長度
L：Shaft length
of shaft .
+10
-30
360° 回轉
360° ( Endless )
端子無損壞或顯著松動,但是
端子可允許彎曲 .
Without damage or excessive
looseness of terminals. Terminal
bend is permitted.
軸擠壓引張強
度
Push - pull
strength of
shaft