Data Sheet

APPD. CHKD. DSGD.
VERSION :
PAGE :
DATE APPD DSGD 2010.10.11 2010.10.11 2010.10.11
DRAWING NO.:
固定板與端子間100MΩ以上.
現象 .
2–6
2–7
a voltage of 360V A.C. shall be applied for 2 sec
於固定板與任一端子間外加電壓300VA.C.
外加電壓250VD.C 于固定板與任一端子間.
Measurement shall be made under the condition
resistance
如圖五所示 , in < fig. 5 >
A voltage of 300V A.C. shall be applied for 1 min or
※ 與韌體程式之搭配性，請實際使用測試確認之。
Note : ※ The test is conducted with equipment at constant speed: 360°/S according to Spec.
Item 2-4 & 2-5, and the test result could be different from the result by manual test.
※ In order to prove the interoperability between the firmware and the encoder,
1分鐘或360VA.C. 2 秒鐘 無損傷,短路及絕緣破壞
please test the part in real condition
回轉式位元產生器規格書
ROTATIONAL ENCODER SPECIFICATIO
N
item conditions specifications
NO.
項 目 條 件 規 格
2–5
絕緣阻抗
100MΩ MIN .
between individual terminals and attaching plate.
which a voltage of 250VD.C is applied
以定速每秒鐘旋轉360°測定之 .
Insulation
terminals and attaching plate
Between individual
Measurement shall be made under the condition
which the shaft is rotated in 360° /S(constant speed).
相 位 差
Phase-difference
旋轉方向
注意事項 :
※ 2-4、2-5之規格，為360゜/ 秒等速下運轉檢測之，與手動旋轉會有所不同。
∆T ≧ 3.5 msec
Rotational direction
( Leak current : 1mA )
Without damage to parts
arcing or breakdown .
between individual terminals and attaching
DOCUMENT NO. :
廖智順 鐘學峰 余倩
EC12PLRGBSDVBF-D-25K-24-24C-61/08-6H
TOP-UP INDUSTRY CORP.
B
5 OF 10
EC12PSD-017
可 正 欣 有 限 公 司
CHKDSYMB
耐電壓強度
Dielectric
strength
<圖五> <fig.5>