Data Sheet

Page 76
RFM69HCW
Tel: + 86-755-82973805 Fax: [phone] E-mail: [e-mail] http:/ / www.hoperf.com
ADVANCED COMMUNICATIONS & SENSING DATASHEET
7.2.2. Manual Reset
A manual reset of the RFM69HCW is possible even for applications in which VDD cannot be physically disconnected.
Pin RESET should be pulled high for a hundred microseconds, and then released. The user should then wait for 5 ms
before using the module.
Figure 39. Manual Reset Timing Diagram
Note whilst pin RESET is driven high, an over current consumption of up to ten milliamps can be seen on VDD.