Datasheet

DA16200MOD
Ultra Low Power Wi-Fi Module
Datasheet
Revision 3.1
03-Feb-2021
CFR0011-120-00
59 of 60
© 2021 Dialog Semiconductor
Revision History
Revision
Date
Description
3.1
03-Fab-21
● Editorial
● Removed BOR part
● Added Note for Power on Sequence in the Section 6.1, Updated Figure 7
and Table 16
● Section 8.7.3 Fixed typo
● Added Section 8.7.1 and 8.7.2
● Updated Applications Schematic
3.0
23-Jul-20
● Sync with SoC datasheet v3.1
● Modified Chapter 3 description to Network subsystem layer.
● Modified DA16200MOD pin Mux (Table 2)
○ Added module default pin conditions
○ I2C CLK GPIOA2 -> GPIOA3
● Added chapter 5.3.3, 5.3.4
● Modified Rx max input level in chapter 5.4.1(Table 11)
● Updated Chapter Note 1 Sleep mode description
● Updated RTC_PWR_KEY description and remove one sentence which
leads to misunderstanding. Table 17
● Modified I2C timing in table Table 30, Table 32
● Added description of chapter 8.9.1
● Updated Chapter 9 application schematics
● Changed Module dimension picture Error! Reference source not found.,
Error! Reference source not found.
● Removed F_xx pins
● Changed the link from customer support portal to Dialog website
● Added PCB land pattern Figure 46, Figure 47
2.0
08-May-20
● Added Tolerance of dimension
● Added min/max Radio characteristics in Table 11, Table 12and Table 13
● Modified Chapter 8.10.3 Baud rate
● Updated Reach and ROHS compliance
0.4
07-Apr-20
● Updated Key Features
● Modified DA16200MOD pin Mux Table 2
● Chapter 7.4 Pulse Counter added
● Chapter 8.10.1 RS-232 added
0.3
23-Mar-20
● Added ESD performance, Table 15
● AC characteristics and current consumption of data updated in Table 11,
Table 12 and Table 13
● Updated Key Features, about clock source & embedded memory
0.2
22-Oct-19
● Modified module size
0.1
03-Oct-19
● Preliminary datasheet