User Manual

Page 6
4
Right click on slider - sensor value or sensor - button pressed. Then click on show ScratchBoard watcher.
5
Right click the off on the ScratchBoard watcher. You will want to click select serial/USB port. Then click the COM
port your PicoBoard is on. If you are running Mac OS X, choose the port that says /dev/tty.usbmodem###### or
/dev/tty.usbserial-A#######. If you are running Windows choose the COM port you indentified earlier. You should
see now sensor values in the ScratchBoard watcher!
You are now set up and ready to do programming in Scratch! In Scratch, more PicoBoard examples can be found by
going to File -> Open -> Examples -> Sensors and Motors. When you are done, you can share your project or view
other projects on the Scratch website at: http://scratch.mit.edu/
HAVE FUN PROGRAMMING
Windows
Mac OS X