Data Sheet

NINGBO XIHAN TIN SOLDER CO.,LTD. TEL:+ 86 574 875 777 00
Dongshao,Zhuangqiao,Ningbo,China. 315032
Website: www.solderchina.com FAX:[phone]
4. First-aid measures
Symptoms of poisoning may even occur after several hours; therefore
medical observation for at least 48 hours after the accident.
After inhalation: supply fresh air, consult doctor in case of
complaints.
After skin contact: immediately wash with water and soap and rinse.
After eye contact: Rinse opened eye for several minutes under running water.
After swallowing: Induce vomiting, if person is conscious, Seek medical help.
5. Fire-fighting measures
The products do not have fire possibility. Melted solder above 1000℃ will release toxic lad and/or
antimony fumes.
Protective equipment: Wear self-contained respiratory protective device.
6. Accidental release measure
Personal precautions:
Wash hands after handling.
Ensure adequate ventilation.
Environmental precautions:
Do not allow product to reach sewage or any water course.
Cleaning or collecting:
Melted solder will solidify on cooling and can be scraped up. Avoid breathing fumes if a gas torch is
used to cut large pieces.
7.Handling packaging and storage
Handling precautions: Wash hands after handling.
Packaging: wound onto spools of various capacities or in cartons
Storage conditions: No special requirements.
8.Exposure controls and personal protection.
General information:
Keep away from foodstuffs, beverages and feed.
Wash hands before breaks and at the end of work.
When ventilation is not sufficient to remove fumes form the breathing zone, a safety approved
respirator or self-contained breathing
apparatus should be worn. In handling, please wear gloves and goggles.