Data Sheet

ManualsBrandsSparkfun Electronics ManualsRobots to Build & ExperimentLead Free Solder (100g)

NINGBO XIHAN TIN SOLDER CO.,LTD. TEL:+ 86 574 875 777 00

Dongshao,Zhuangqiao,Ningbo,China. 315032

Website: www.solderchina.com FAX:+86 574 875 777 58

Material Safety Data Sheet

According to 91/155 ECC 1/3

Date Created : 04/19/06 -Update : 11/12/08 – Revision Number : 05

1. Identification and Supplier

Product Descriptions:

Sn99.3Cu0.7, Sn99.5Cu0.5, Sn97Cu3, LEAD-FREE SOLDER WIRE

Manufacturer: Ningbo Xihan Tin Solder Co.,Ltd.

Address: Dongshao, Zhuangqiao,Jiangbei,Ningbo,China.

Tel: +86-574-87577700

Fax:+86-574-87577758

2. Composition

Description:

Content CAS Symbol composition

90-100% 7440-31-5 tin

≤3％ 7440-50-8 copper

≤2.5％ 144413-22-9 Xn R42/43 Acid Hydrogenation Gum Resin

≤2.5％ 65997-06-0 Xn R42/43 Modified Rosin

2.5-10％ 112-59-4 Xn R21-41 Ethanol

3. Hazards identification

Xn harmful

R43 May cause sensitization by skin contact.

Vapours may cause drowsiness and dizziness.

Should not be used on surfaces liable to be chewed or sucked by children.

Summary of content (4 pages)

PAGE 1
Material Safety Data Sheet According to 91/155 ECC 1/3 Date Created : 04/19/06 – Revision Number : 05 -Update : 11/12/08 1. Identification and Supplier Product Descriptions: Sn99.3Cu0.7, Sn99.5Cu0.5, Sn97Cu3, LEAD-FREE SOLDER WIRE Manufacturer: Ningbo Xihan Tin Solder Co.,Ltd. Address: Dongshao, Zhuangqiao,Jiangbei,Ningbo,China. Tel: +86-574-87577700 Fax:+86-574-87577758 2. Composition Description: Content 90-100% ≤3％ ≤2.5％ ≤2.5％ 2.
PAGE 2
4. First-aid measures Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours after the accident. After inhalation: supply fresh air, consult doctor in case of complaints. After skin contact: immediately wash with water and soap and rinse. After eye contact: Rinse opened eye for several minutes under running water. After swallowing: Induce vomiting, if person is conscious, Seek medical help. 5.
PAGE 3
9. Physical and Chemical properties. Physical State(Appearance) : white metal wire. Melting temperature : ＞ 100℃ Specific Gravity(Density) : ＞4.5g/cm3 at 20℃ Flash Point : N/A Automatic combustion temperature: N/A 10. Stability and reactivity Conditions to avoid : N/A Materials to avoid : N/A Hazardous decomposition: N/A 11. Toxicological information.(health, hazard and symptoms) Eye contact : Smoke during soldering can cause eye irritation.
PAGE 4
15. Regulatory information Where appropriate, refer to the information under the headings: 8--Exposure controls and personal protection 13–-Disposal considerations. 16. Other information This product should only used by authorized personnel who have been properly trained in the handling and use in accordance with good industrial hygiene and safety practices. A specific product specification data sheet is also available.