Data Sheet

Page 116
RFM95/96/97/98(W)
Tel: + 86-755-82973805 Fax: + 86- 755-82973550 E-mail: [e-mail] http:/ / www.hoperf.com
WIRELESS & SENSING PRELIMINARY DATASHEET
This example is achieved by programming the Sequencer as follows:
Table 94 Beacon Mode Settings
Variable Effect
IdleMode 1: Sleep mode
FromStart 00: To LowPowerSelection
LowPowerSelection 1: To Idle state
FromIdle 0: To Transmit state on T1 interrupt
FromTransmit 0: To LowPowerSelection on PacketSent interrupt
T
Timer1 +
T
Timer2
define the time between the start of two transmissions.