Guide
1/22/2018 micro:bot Kit Experiment Guide - learn.sparkfun.com
https://learn.sparkfun.com/tutorials/microbot-kit-experiment-guide/all#about-the-motobit-board 70/75
different colors; red, black and white. Red is the supply voltage, black is ground and white is the signal. Hook the two
servos up to the moto:bit at the two labeled servo ports. Make sure you line up ground to ground.
The “right” servo is connected to pin P16 while the “left” is connected to pin P15. Using a bit of hot glue or tape, you
can attach the servos to each side of the robot chassis.
Next, you can build the jousting lances by utilizing some grilling skewers! You will only need two that can be cut down
to the needed size. You can either glue or tape each skewer to the servo to the supplied attachments. Each servo set
comes with a small bag of attachments as seen below. In this experiment, we utilized the double arm micro horn, but
any of them will work.
