Guide
1/22/2018 micro:bot Kit Experiment Guide - learn.sparkfun.com
https://learn.sparkfun.com/tutorials/microbot-kit-experiment-guide/all#about-the-motobit-board 62/75
Your robot should drive forward until one of the side line sensors detects the line and then it will turn in that direction
to correct itself. Depending on your line shape and thickness your robot may “waddle” more or less.
Go Further: Your robot can go where you tell it by following a line. Try building an obstacle course for your robot
using the line sensor!
Troubleshooting
Robot drives in a circle - Double check your wiring and your code, your robot is not seeing the line. Also,
double check that there isn’t something like dust blocking your sensor.
Robot isn’t moving - Pesky motor switch! Make sure that is set to “run” and you have fresh batteries
Robot waddles a lot! - Change the width of your line.
