Guide

1/22/2018 micro:bot Kit Experiment Guide - learn.sparkfun.com
https://learn.sparkfun.com/tutorials/microbot-kit-experiment-guide/all#about-the-motobit-board 58/75
The line sensors hookup to your moto:bit via female / female jumper wires that snake through the chassis of your
robot up to the moto:bit. The sensors hookup to the moto:bit in the following order:
LEFT => PO
CENTER => P1
RIGHT => P2
Double check to make sure they are hooked up correctly and in the proper orientation
Running Your Script