Guide

1/22/2018 micro:bot Kit Experiment Guide - learn.sparkfun.com
https://learn.sparkfun.com/tutorials/microbot-kit-experiment-guide/all#about-the-motobit-board 55/75
Robot doesn’t detect line - If changing the width of your line doesn’t help, remember line sensor calibration
settings can be very sensitive depending on your environment.
Experiment 3: Following a Line
Introduction
OK, you have your robot staying inside of box drawn on the floor, but that still seems a little odd and random. You
want your robot to go somewhere, do something and then keep going! In this experiment you will elaborate what you
learned from Experiment 2 to get your robot to follow a line.
Parts Needed
1x micro:bit board (Not Included)
1x Micro B USB cable (Not Included)
1x moto:bit carrier board
1x Shadow Chassis
3x Line following sensors
3x Servo style jumper wires
1x micro-B USB Cable
1x 4xAA Battery Holder
4x AA Batteries (Not Included)
Introduction to Using Multiple
Line Sensors