Guide

1/22/2018 micro:bot Kit Experiment Guide - learn.sparkfun.com
https://learn.sparkfun.com/tutorials/microbot-kit-experiment-guide/all#about-the-motobit-board 27/75
Please Note: When you have the micro:bot upright and the front of the chassis facing away from you, "left"
sensors/motors will be on the left side and "right" sensors/motors will be on the right side. Also, the motor wires
are intentionally switched for the right motor -- see notes below.
Line Followers
Left Line Follower:
SparkFun
moto:bit Pins
Jumper Wires Left Line Follower
Board
P0 3-Wire Jumper Cable -
Yellow
OUT
3.3V 3-Wire Jumper Cable -
Orange
VCC
GND 3-Wire Jumper Cable -
Red
GND
Center Line Follower:
SparkFun
moto:bit Pins
Jumper Wires Middle Line Follower
Board