Guide

1/22/2018 micro:bot Kit Experiment Guide - learn.sparkfun.com
https://learn.sparkfun.com/tutorials/microbot-kit-experiment-guide/all#about-the-motobit-board 26/75
NOTE:The other slots in the moto:bit mounts can be used to hold the Arduino UNO or the Sparkfun RedBoard.
Connecting the Cables
It is time to connect the jumper wires; it is really important that these connections are right.
You can follow along with the pin out tables or scroll down for a diagram. Trace each cable poking through the top
chassis plate to make sure you know what it is connected to.