Guide

1/12/2018 mbed Starter Kit Experiment Guide - learn.sparkfun.com
https://learn.sparkfun.com/tutorials/mbed-starter-kit-experiment-guide/all 57/65
Hookup Table
Place the LPC1768 in the first breadboard with pin VOUT in position i1 and pin 20 in position b20.
Connect the rest of the components as follows:
Component Breadboard 1 Breadboard 2
MicroSD Transflash Breakout* h24 (CS) h25 (DI) h26 (VCC) h27 (SCK) h28 (GND) h29 (DO)
Transistor - NPN (2N3904) c27 (E) c28 (B) c29 (C)
330 Resistor b24 b28
Pushbutton d2 d4 g2 g4
Pushbutton d7 d9 g7 g9
Pushbutton d12 d14 g12 g14
Pushbutton d17 d19 g17 g19
Speaker f25 (+) e30 (-)
Jumper Wire j1 g26
Jumper Wire a1 ( - )
Jumper Wire a5 g25
Jumper Wire a6 g29
Jumper Wire a7 g27
Jumper Wire a8 g24
Jumper Wire g28 ( - )
Jumper Wire a18 a24
Jumper Wire a27 ( - )
Jumper Wire a29 a30
Jumper Wire j2 j25
Jumper Wire a11 j2
Jumper Wire ( - ) j4
Jumper Wire a12 j7
Jumper Wire ( - ) j9
Jumper Wire a13 j12
