Guide

1/12/2018 mbed Starter Kit Experiment Guide - learn.sparkfun.com
https://learn.sparkfun.com/tutorials/mbed-starter-kit-experiment-guide/all 48/65
Click on “Device Manager.” You should see the Device Manager open up. Click to expand “Ports (COM & LPT).” Make a note of which COM port is listed as the
“mbed Serial Port” (COM12, in this example).
Note: If you do not see the mbed Serial Port listed, you need to install (or re-install) the mbed Windows serial driver.
Double-click the putty.exe icon to start PuTTY. In the left pane, click “Terminal” to configure PuTTY. Check “Implicit CR in every LF” so that text appears properly
aligned in our console.
Click “Session” in the left pane. Click the “Serial” radio button and change “Serial line” to your COM port (COM12 in this example). Leave speed at 9600. Click
“Open” to start a serial terminal.