Guide

1/12/2018 mbed Starter Kit Experiment Guide - learn.sparkfun.com
https://learn.sparkfun.com/tutorials/mbed-starter-kit-experiment-guide/all 41/65
Hookup Table
Place the LPC1768 in the first breadboard with pin VOUT in position i1 and pin 20 in position b20.
Connect the rest of the components as follows:
Component Breadboard 1 Breadboard 2
Mini USB Breakout* h25 (GND) h27 (D+) h28 (D-) h29 (VCC)
Pushbutton d2 d4 g2 g4
Pushbutton d10 d12 g10 g12
Pushbutton d18 d20 g18 g20
Pushbutton d26 d28 g26 g28
10K Resistor i2 ( + )
10K Resistor i10 ( + )
10K Resistor i18 ( + )
10K Resistor i26 ( + )
Jumper Wire j1 ( + )
Jumper Wire a1 ( - )
Jumper Wire a2 f29
Jumper Wire f25 ( - )
Jumper Wire j9 f28
Jumper Wire j10 f27
Jumper Wire a5 h2
Jumper Wire a6 h10
Jumper Wire a7 h18
Jumper Wire a8 h26
Jumper Wire ( - ) h4
Jumper Wire ( - ) h12
Jumper Wire ( - ) h20
Jumper Wire ( - ) h28
* Pins not listed are not used.
The Code